Laboratory Muller

Model 42110

Laboratory Muller

The Simpson Laboratory Muller is used to prepare mixtures of clay bonded foundry sands and other chemical processing applications that require the high intensity mulling action of the wheels.

The mulling conditions found in industrial mullers can be emulated on a smaller scale using a laboratory muller.

The muller incorporates two vertical mulling wheels on independent suspensions. Plows turn the sand mixture over and direct fresh material into the path of the mullers. The muller weight can be adjusted by a single load spring.

The muller has a mixing capacity of approximately 4 kg. (9 lbs.) or 3.7 liters (0.13 cu.ft.) of bentonite bonded silica molding sand or similar chemicals and operates with a 0.559kw (0.75 HP) motor. The mixing bowl dimensions are 394mm (15.5”) inside diameter x 216mm (8.5”) deep.

Part numbers

AFS:

  • #0042110S-2-ASM
  • #0042110-ASM
  • #0042110SA-2-ASM
  • #0042110S-ASM
  • #0042110-2-ASM
  • #0042110SA-ASM

Part numbers

Metric:

  • #0042110S-2-ASM
  • #0042110-ASM
  • #0042110SA-2-ASM
  • #0042110S-ASM
  • #0042110-2-ASM
  • #0042110SA-ASM

Sand casting process

Clay Bonded Sand

Specifications

Part Number: 0042110S-2-ASM

Construction Type: Stainless Steel
Power Requirements: 230 Volts, 50Hz
Length: 20" / 508mm
Width: 21" / 533mm
Height: 18" / 457mm
Weight: 230lb / 100kg

Part Number: 0042110-ASM

Construction Type: Cast Iron & Steel
Power Requirements: 120 Volts, 60Hz
Length: 20" / 508mm
Width: 21" / 533mm
Height: 18" / 457mm
Weight: 230lb / 100kg

Part Number: 0042110SA-2-ASM

Construction Type: Stainless Steel with Special Discharge
Power Requirements: 230 Volts, 50Hz
Length: 20" / 508mm
Width: 21" / 533mm
Height: 18" / 457mm
Weight: 230lb / 100kg

Part Number: 0042110S-ASM

Construction Type: Stainless Steel
Power Requirements: 120 Volts, 60Hz
Length: 20" / 508mm
Width: 21" / 533mm
Height: 18" / 457mm
Weight: 230lb / 100kg

Part Number: 0042110-2-ASM

Construction Type: Cast Iron & Steel
Power Requirements: 230 Volts, 50Hz
Length: 20" / 508mm
Width: 21" / 533mm
Height: 18" / 457mm
Weight: 230lb / 100kg

Part Number: 0042110SA-ASM

Construction Type: Stainless Steel with Special Discharge
Power Requirements: 120 Volts, 60Hz
Length: 20" / 508mm
Width: 21" / 533mm
Height: 18" / 457mm
Weight: 230lb / 100kg

Manual

Manual

Get the guidance you need to optimize your sand testing process with ease and confidence.

Need More Information?

Contact Simpson to learn more about our innovative solutions and how we can support your operation. We are here to help if you have any questions or need assistance.

Need More Information

Related Content

Electronic Universal Sand Strength Machine - Model 42104 image

Electronic Universal Sand Strength Machine - Model 42104

Determines the strength properties of clay and/or chemically bonded foundry sand specimens.

Digital Absolute Permmeter - Model 42105 image

Digital Absolute Permmeter - Model 42105

A fully automatic system which measures the permeability of porous sand masses, both in compacted and loose states.

Wet Tensile Tester - Model 42112 image

Wet Tensile Tester - Model 42112

Determines tensile strength of the condensation zone that is created in all clay bonded molds during and after pouring.

Laboratory Sifter - Model 42106 image

Laboratory Sifter - Model 42106

Used to determine the fineness of foundry sands.