Digital Absolute Permmeter

Model 42105

Digital Absolute Permmeter | SIMPSON

Part numbers

AFS: #0042105-ASM
Metric: #0042105-M-ASM

Sand casting process

  • Clay Bonded Sand
  • Cold Box
  • Core Oil
  • Hotbox/Warmbox
  • Nobake/Air-set
  • Shell/Croning

Replacement part

Rubber Pedestal Part Number: 0046034

Calibration

Permeability Standard

Calibration Services

Specifications

Compressed Air: 6 bar (90 psi)
Power Requirements: 100-240 Volts, 50/60 Hz
Length: 10.25" / 260mm
Width: 14.25" / 362mm
Height: 20.5" / 521mm
Weight: 48lb / 21.8kg

The Digital Absolute Permmeter is a fully automatic system which measures the permeability of porous sand masses, both in compacted and loose states.

Simply place your specimen on the rubber pedestal and press start. With the addition of specifically designed accessories, the Permmeter can also measure the permeability of raw foundry sand, shell coated foundry sand, and refractory coatings that are used in the foundry industry.

Watch "How to videos"

Key Advantages:

  • Uses highly sensitive and accurate electronic sensors and digital timers to measure the controlled air volume.
  • The permeability function has been corrected to compensate for any fluctuations in air pressure and eliminate the unit’s own resistance to air passage.
  • Easy to operate and very repeatable; only requires a single touch operation.
  • Can be digitally calibrated by the operator with the purchase of the 42132 permeability standard.
  • Single piece cast aluminum housing, which makes it extremely durable.

When the Permmeter is in the “exploration mode”, the microprocessor determines and compensates for parasitic resistance to the pneumatic circuit created by other measuring devices.

Such as the Mold Permeability Accessory (Model 42105B) and the Base Permeability Accessory (Model 42105C).

This feature enables the identification of permeability of a porous body attached to another porous body, provided that it is possible to previously determine the permeability of one of them. This is the case of permeability of a wash applied to a permeable substrate, for instance, a washed core. The final results are shown in the display, with no need for calculations.

The unit includes an Electro-valve that controls the compressed air flow which fills and therefore raises the gasometric chamber up to a certain height, after which the inlet flow is stopped, and the measuring stage starts.

The absolute determination of permeability is done by measuring the time required for a specific air volume at constant pressure to flow through the specimen or body being tested.

The permeability of either a standard 2 in. x 2 in. AFS or 50mm x 50mm metric foundry sand specimen can automatically be measured.

COMPONENTS INCLUDED

  • Pneumatic Regulator/Filter
  • Pneumatic Tubing (Approximately 1 m (3’)
  • Pneumatic Fitting (Connects pneumatic tubing to the pneumatic regulator/filter outlet)

Outdated Permmeter? Time to Upgrade.

Still using a Simpson Digital Absolute Permmeter from before 2009?

Older units have outdated, non-repairable components and no easy service options. New models are CE Certified, safer, and more reliable—offering the precision and protection your lab needs.

Check the nameplate on the back for the manufacturing year.The first four digits represent the month and year. For example, 0109 means it was built in January 2009.

Digital Absolute Permmeter | SIMPSON

Manual

Get the guidance you need to optimize your sand testing process with ease and confidence.

Need More Information?

Contact Simpson to learn more about our innovative solutions and how we can support your operation. We are here to help if you have any questions or need assistance.

Need More Information

Related Content

Shell Permeability Accessory | Model 42105A | SIMPSON

Shell Permeability Accessory - Model 42105A

Measures the permeability of shell sand samples.

Mold Permeability Accessory | Model 42105B | SIMPSON

Mold Permeability Accessory - Model 42105B

Measures the permeability of an actual production mold or core.

Base Permeability Accessory | Model 42105C | SIMPSON

Base Permeability Accessory - Model 42105C

Tests the base permeability of dry sands.

Additional Permeability Accessory | Model 42105D | SIMPSON

Additional Permeability Accessory - Model 42105D

This accessory to the Digital Absolute Permmeter tests the permeability of refractory coatings applied to cores and molds.