Test Pieces Blower

Model 42109

Test Pieces Blower

Part numbers

AFS: 

  • #0042109-ASM
  • #0042109-220-ASM

Metric:

  • #0042109-ASM
  • #0042109-220-ASM

Sand casting process

  • Cold Box
  • Hotbox/Warmbox
  • Shell/Croning

Part Number: 0042109-ASM

Compressed Air: 6 bar (90 psi)
Power Requirements: 120 Volts, 60 Hz
Length: 17" / 432mm
Width: 16" / 406mm
Height: 23" / 584mm
Weight: 104lb / 47.3kg

Part Number: 0042109-220-ASM

Compressed Air: 6 bar (90 psi)
Power Requirements: 230 Volts, 50 Hz
Length: 17" / 432mm
Width: 16" / 406mm
Height: 23" / 584mm
Weight: 104lb / 47.3kg

The Test Pieces Blower is used to make standard tensile, transverse (except cold box) and hot distortion test pieces.

Considering that blowing is the most widely used compacting method for chemically bonded sands, the Test Pieces Blower was designed so the control of sands and binders is performed under conditions similar to those in a plant. The operation of the instrument is done via a single lever that controls the movement of the tooling and the sand blow.

When using the appropriate core box tooling and accessories, test specimens can be prepared for:

  • Tensile strength – shell sand
  • Cold Tensile strength, hot and warm box
  • Transverse strength/hot distortion – shell sand
  • Disc transverse strength hot and warm box (special tooling is required for sample preparation – requires Disc Transverse Tooling, Model 42109C).

To help maintain repeatability, specimen dimensions are kept within narrow margins and blowing and curing conditions are constant on the Simpson Test Pieces Blower.

Components Included: Core box tooling (Enables preparation of 1” (25 mm) core tensile dog bone, .25” (6 mm) transverse/hot distortion and .25” (6 mm) shell tensile dog bone specimens), Sand cartridge for shell sand, Cartridge blowing lid, Plastic tubing (6.1 mm O.D. x 4.0 mm I.D.) and Heating plates.

Tooling

  • AFS Core Tensile Strength Tooling Part Number: 0026-132
  • AFS Shell Tensile Strength Tooling Part Number: 206602
  • AFS Shell Transverse Strength Tooling Part Number: 206604
  • AFS Disc Transverse Tooling (not shown) Part Number: 0042109C
  • AFS 1.125 x 2” Cylindrical Specimen Tooling (not shown) Part Number: 0042109D
  • Metric Core Tensile Strength Tooling Part Number: 0026-132-M
  • Metric Shell Tensile Strength Tooling Part Number: 206603
  • Metric Shell Transverse Strength Tooling Part Number: 206605

Manual

Get the guidance you need to optimize your sand testing process with ease and confidence.

Need More Information?

Contact Simpson to learn more about our innovative solutions and how we can support your operation. We are here to help if you have any questions or need assistance.

Need More Information

Related Content

Catalyst Vaporizer - Model 42109A image

Catalyst Vaporizer - Model 42109A

Connects to the Test Piece Blower or the Modified Test Piece Blower in order to control the gassing and purging sequence of the test specimen via the included electronic cables and supply lines.

Cold Box Gassing Purging Device - Model 42109B image

Cold Box Gassing Purging Device - Model 42109B

Attaches to the tooling of the Test Piece Blower and Modified Test Piece Blower in order to produce cold box (gas curred) test specimens.

Disk Transverse Accessory - Model 42109C image

Disk Transverse Accessory - Model 42109C

Attaches to the tooling of the Test Piece Blower and Modified Test Piece Blower in order to produce cold box (gas curred) test specimens.

Electronic Universal Sand Strength Machine - Model 42104 image

Electronic Universal Sand Strength Machine - Model 42104

Determines the strength properties of clay and/or chemically bonded foundry sand specimens.